Select the search type
 
  • Site
  • Web
Search
 Français (France) English (United Kingdom) Español (España) Italiano (Italia) Deutsch (Deutschland)
You are here:   The Product > Functions > Harmonic Analyser
News
 
 

2 new models!

After power measurement and electronics, the SCOPIX III family has now been extended with specific features for testing field buses. With the SCOPIX BUS models, you can check the physical integrity of field buses to verify the signal transmission quality with 14 protocols: KNX-DALI-CAN-LIN-FLEXRAY-PROFIBUS-RS-ETHERNET …

Find out more...

2 new models!

After power measurement and electronics, the SCOPIX III family has now been extended with specific features for testing field buses. With the SCOPIX BUS models, you can check the physical integrity of field buses to verify the signal transmission quality with 14 protocols: KNX-DALI-CAN-LIN-FLEXRAY-PROFIBUS-RS-ETHERNET …

Find out more...

HARMONIC ANALYSER
 
 

2 or 4-channel Harmonic Analyser


Harmonic analysis can be performed up to the 61st order to meet the requirements of the  EN 50160 standard (THD on at least 50 orders), with a fundamental frequency between 40 and 450 Hz.

 

 

  • Simultaneous view of the harmonic analyses on 2 or 4 channels, depending on the SCOPIX model.
  • Permanent display of the total RMS and THD values and the characteristics of the order selected ( %F, phase, frequency, VRMS ).

 

Discover the other functions

2 or 4-channel Harmonic Analyser


Harmonic analysis can be performed up to the 61st order to meet the requirements of the  EN 50160 standard (THD on at least 50 orders), with a fundamental frequency between 40 and 450 Hz.

 

 

  • Simultaneous view of the harmonic analyses on 2 or 4 channels, depending on the SCOPIX model.
  • Permanent display of the total RMS and THD values and the characteristics of the order selected ( %F, phase, frequency, VRMS ).

 

Discover the other functions

POWER & HARMONICS
 
 

In Analyser mode, it is now possible to analyse the harmonics on the single-phase apparent power, in particular for motor diagnostics.
It also measures up to the 61st order, making it ideal for compliance with the EN 50160 standard (minimum required: 50th order).

In Analyser mode, it is now possible to analyse the harmonics on the single-phase apparent power, in particular for motor diagnostics.
It also measures up to the 61st order, making it ideal for compliance with the EN 50160 standard (minimum required: 50th order).

Useful Tip
 
 

It is possible to preselect the frequency of the fundamental for the standards (50 Hz, 60 Hz and 400 Hz).

This function can be used to improve performance during analysis, particularly by allowing measurement when the level of a harmonic order is greater than the fundamental.

It is possible to preselect the frequency of the fundamental for the standards (50 Hz, 60 Hz and 400 Hz).

This function can be used to improve performance during analysis, particularly by allowing measurement when the level of a harmonic order is greater than the fundamental.